4.8 Grade Carbon Steel Hot Dip Galvanized Shear Nuts M10 For
1. Product Description
The shear nuts is also a kind of nut. It has a bowl and a hex nut,
combination. They are designed to be a permanent fixture after
installation. The hexagonal part of the nut shears off at a
pre-determined torque leaving only a tamperproof non-removeable
cone. Available in either bright zinc plated steel (EN1A) or
stainless steel (304).Shear nuts are used for security, the hexagonal section shears off
when the required torque is applied, leaving behind only the tamper
resistant cone section which is virtually impossible to remove.
This product will be made of two sets of nuts. The inner sleeve is
made of thread, the outer shape adopts the outer dimension of the
international nut, and the inner is matched together. When the
external force is applied with the outer, the inner sleeve is
rotated to make the inner sleeve and the tightening nut tight
Produce tension, to achieve the purpose of locking. When the
external force continues to act on the coat to reach a certain
moment, the outer and the inner sleeve off, the coat was free
rotation state. While the inner sleeve can no longer twist, to
prevent and prevent, the purpose of anti-theft.
Features: anti-theft, anti-loose effect is good.
1. With ordinary bolts, no special tools, easy installation,
efficient and time-saving.
2. Dedicated dedicated demolition tool, easy removal of the tower.
1. Screw the nut with the protruding step facing down.
2. With the tightening nut and tight, after the force to make the
inner jacket of the anti-theft nut completely unscrewed, that is
Note: The standard nut must be fastened to the ultimate tightening
torque of the tower material before installing the anti-theft nut.
|10mm||31-34||23-28||Finishes: Zinc / Dacromeet / J5500 / Galvanised|
|12mm||47-55||35-40||Other materials / finishes on request|
Shear Nut offer an inexpensive solution to many types of theft.
They are used to prevent the theft of the unanthorised relocation
of seating or something.
They are installed by using standard tooling. When the nut or bolt
is fully tighened, the hex drive head is designed to sgear off the
additional torque is applied, leaving the sear bolt or the threaded
conicak lower collar of the shear nut in position on the standard
bolt or stud thread, so making the products permanent fixed.
As a family owned business, our goal has always been to provide
customers with unmatched personalized service and support.
Knowledge gained as both an applicator and a chemical manufacturer
gives us extra insight and control over how to meet even the
toughest requirements. Our processing divisions deal directly with
regional customers and pride themselves on their quality and
As a fully integrated company, we do it all. We make the materials,
build the application equipment and handle all aspects of
operations from formulating custom chemical compositions and
coating fasteners to providing advanced in-line inspection,
packaging and delivery services. Find out how we can assist you on
your next project.