Stainless Steel Bolts DIN931 SS304 SS316 M6-M64 Hex Head Bolts
Hexagonal bolt combined with head and the screw fastener,
consisting of bolts Material iron bolts and stainless steel bolts,
which can divided into full thread hex bolt and half thread hex
bolt. Reasonably, these kinds of fasteners might be known as bolts, but according to the US government document Distinguishing Bolts from Screws products' standard. The grade of the iron bolts are 3.6,4.6,4.8,5.6,6.8,8.8,9.8,10.9,12.9 etc, bolts Gr8.8 or above which is made of low carbon steel or carbon steel with heat
treatment (quenching and tempering), normally named as high
strength bolts, the rest is known as ordinary bolts. The stainless steel are SUS201 SUS304 SUS316 etc. Used with the nut for fastening two parts with hole.
Hex Head Bolts are designed for assembly into a hole. Hex Head Bolts according to SAE specifications with a designed washer face under the head and a chamfered point. Grade
9.8 has a greater tensile strength than Grade 8.8.Standard provides specifications for the thread M3 ~ M64, A and B
grade hex head bolts .A level for D <= 24 and L <= 10D or L
<= 150mm (according to a small value) bolts; for Class B D>
24, or L> 10D or L> 150 (by a smaller value) of the bolt
Hex bolts Dimensions (pictured)
Tags: thread size D = M12, nominal length L = 80mm, the performance
rating of 8.8, the table with the oxide, marking Example A grade
hex head bolts
Bolt GB / T5782-86-M12 × 80
GB external hexagonal bolt head on the side of the common size and
with the use of GB wrench
Thread diameter edge-to-edge head size size S socket wrench
combination wrenches Double open-end wrench Double wrench.
Hex bolts are the most frequently used types A bolt where it holds
the main function is to meet with the nut thread. With this
threaded connection method, so that the two parts into one.
C grade hex bolts used mainly in rough surface, the steel structure
of less precision machinery, equipment. A and B grade hex bolts are
mainly used in the smooth surface of the high precision machinery
Most stainless steel hex screws with hexagonal head are whole tooth
the whole tooth Bolt Standard: DIN933, GB5783, ISO4017,
ANSIB18.2.1, JISB1180; non-standard whole tooth bolts DIN931,
GB5782, ISO4014, ANSIB18.2.1, JISB1180.
|Product Dimensions||M10 x 40mm|
|Item Weight||35kg 1000 pieces|
|Free Sample||Available, only shipping need to be charged|
|Thread type||Paritcial Thread|
Corrosion Resistance,High Tensile, offer high holding power
Designed for using in high-stress and high-strength applications.
General Fastening applications where need high strength and
superior corrosion resistance.
Common chioce for fastening, which provide high tensile, offering
high holding power and corrosion resistance and don't need any
coating. Durability testing and critical technical design to enhance
fasteners lifetime. Competitive prices with professional factory
supply. Perfect fastening solution with 10 years experiences to
solve your problem: Wide range of parts selection.