Self Tapping Metal Screws Hot Dip Galvanized Lag Eye Screws with
An eye bolt is a bolt with a loop at one end. They are used to firmly attach a
securing eye to a structure, so that ropes or cables may then be
tied to it.Screw rings are forged from the temperature quenching. Screw rings
Surface treatment: CORRUD-DT, the surface treatment is stronger
than ordinary galvanized anti-corrosion effect is at least 20
times. External thread length ¨H¨, bolts and other parts together,
you must use the same quality level of the bolts when replacing.
Eye bolt with forging a whole, and by normalizing treatment and
removal of scale; forgings no over-burning, crack defects; screw
rings unity through hardness test, hardness value HRB67 ~ 95. Crown
screw rings force strength rating 12.9.
Eye bolt must be mounted vertically with the upper plane of the
workpiece, and the joints should be smooth, engaging require close.
You must adjust to the stretching direction of the screws to avoid
contact with sharp edges of objects.
Load testing with Eye bolt by 2.5 times the working load are 20,000
times fatigue test at 1.5 times the working load. Screw rings to
meet or exceed ASME B30.26 standards. Screw rings made of high
alloy steel by reference to Germany RUD WBG type production, the
products are exported to Europe and America, and by local-level G80
standard test. Better material than the existing domestic screw
rings Rally higher offers tensile testing reports. Screw rings
shall professionals operation, see the instructions for use and,
when connected to the spreader should be kept with the spreader
rings rotatable joints, professionals should conduct regular safety
inspection. Maximum working load of up to 30T, and can be
customized inch thread.
|Diameter||Outter Dia.||Thickness||Head Thickness|
|Item Length||2.06 inch|
|Standard||ASME/ANSI B 18.15-1995|
|Free Sample||Available, for free|
High Tensile, Offer High Holding Power, Corrosion Resistance
Eye bolt widely used in ports, power, steel, shipbuilding,
petrochemical, mining, railways, construction, metallurgy,
automobile manufacturing, plastics machinery, industrial control,
highways, large transport, pipelines and auxiliary set, slope
tunnels, wells control protection, salvage, ocean engineering,
airport construction, bridges, aviation, aerospace, and other
important venues and infrastructure construction industry,
machinery and equipment.
1. eye bolts should be 20 or 25 steel (GB699) Manufacturing.
2. The eye bolts must be approved by the whole forging. Forgings
should be normalized, and remove oxide. Grain size of the finished
product should not be lower than level 5 (GB6394), forgings should
not have been burnt, crack defects.